SATLINK WS-6916 DVB-S/S2 HD Digital Satellite TV Finder with MPEG-2/MPEG-4, Digital Satellite Signal Finder Meter, Black

SATLINK WS-6916 DVB-S/S2 HD Digital Satellite TV Finder with MPEG-2/MPEG-4, Digital Satellite Signal Finder Meter, Black

Price: $116.84

Details

  • Brand: SatLink
  • Color: Black
  • Manufacturer: SATLINK
  • Model: WS-6916
  • Weight: 101

Features

  • 3.5 Inch High Definition TFT LCD Screen
  • Fully DVB-S/S2, MPEG-2/MPEG4 compliant, MPEG-2 / H.264 Hardware decoding
  • Supportting Supports for multiple TP detection, scan of Auto,Blind,Manual or NIT, DISEQC 1.0/1.1/1.2 ,0/22khz Tone Speaker Integrated
  • Support both AV out and AV in, HDMI out, 7.4V/3000mAh Li-ion Battery Included
  • Software can be upgraded to search the updated satellites via USB port. The software is used to search the US satellites, but it can search EU satellites via software update. Please email us before you upgrade the Software. Besides, if you have any issues in using it, please don't hesitate to contact us via E-mail. We will provide you with excellent services.

Description

Note:1. WS-6916 Digital Satellite Signal Finder Meter is for free digital signal finders only. It can't search those signal finders which are charged.

2.The system can be upgraded to search the updated satellites via USB port. The system is used to search the US satellites, but it can search EU satellites via system update. However, two systems can not exist in the same time. Please email us before you upgrade the system, we will provide you with detailed instructions.

Features:
3.5 Inch High Definition TFT LCD Screen
Fully DVB-S/S2, MPEG-2/MPEG4 compliant
MPEG-2 / H.264 Hardware decoding
Digital meter for signal strength and quality
Supports for multiple TP detection
Supports scan of Auto,Blind,Manual or NIT
Sound and Light Alarm for Locking Signal
Auto Calculate Angle of AZ ,EL
Supports DISEQC 1.0/1.1/1.2 ,0/22khz Tone Speaker Integrated
Support both AV out and AV in
Supports HDMI out
LNB short protect
7.4V/3000mAh Li-ion Battery Included
Easy to carry.

Simplified MENU OSD Instruction:
After power on, press ok into the main menu and start to set below functions:
For OSD Language/Channel Name/Band Width/ Carrier/ Modulate/FEC/Guard Interval/Output Level/Signal Source functions setting: You can press◀▶;to change or select them.
For Frequency setting: You can press◀▶ move cursor and press ▲▼ key to change numbers.
For Key Tone setting: press◀▶o ON/OFF.
For Service Provider/ Program Name setting: just input the name is ok.
For Factory Setting: press OK to confirm.

After setting above, you can use it normally. For detailed instructions, pls refer to the user menu.

Note: If you have any issues in using it, please don't hesitate to contact us via E-mail. We will provide you with excellent services.