ECHOGEAR Full Motion Articulating TV Wall Mount Bracket for most 37-70 inch LED, LCD, OLED and Plasma Flat Screen TVs w/ VESA patterns up to 600 x 400 - 16" Extension - EGLF1-BK
Availability: Usually ships in 24 hours
Fulfilled by Amazon and Sold by ECHOGEAR
|ECHOGEAR Tilting TV Wall Mount With Low Profile Design for 32-70 inch TVs - Eliminates Screen Glare With 15 Degrees of Smooth Tilt - Easy Install With All Hardware Included - EGLT1-BK
|Sony XBR55X900E 55-Inch 4K Ultra HD Smart LED TV (2017 Model)
|Samsung Electronics UN65MU8000 65-Inch 4K Ultra HD Smart LED TV (2017 Model)
Featuring up to 150° of smooth swiveling capability, this large full-motion TV mount is a real mover... not a shaker. Safety tested and UL Certified to hold up to 132 lbs, you can rest assured your 37" - 70" LED, LCD or Plasma TV will be safe on the strong arm of this Echogear tv mount.
What the H is "UL Certified"? It means we've tested this TV mount to verify that it will hold 4 times the weight rating and some safety science guys (that's a real thing) certified it. We'll do the math for you... 4 X 132 = 528 lbs!
VESA Compatibility: 200x100 up to 600x400 (universal increments)
TV Extension from Wall: 16"
Profile from Wall (Recessed) 2.6"
Swivel: Up to 150 degrees side-to-side (37" TV)
Tension Adjustable? (for smoother/stiffer articulation): Yes, using 7/32" Hex Key on Joint Bolts
Tilt: 5° up and 15° down
Post-install TV leveling adjustment: 3.5° left or right
Wall Plate Dimensions: 17.1" (W) x 10.2" (H)
Max Mounting Hole Dimensions: 16" (W) x 8.9" (H)
Wall Plate Openings for In-Wall Cable Management: 5.6" (W) x 7.6" (H) - Two Openings on each side
Construction: 100% High Grade Steel with Plastic End Caps for TV interface
Favorite Color: ECHOGEAR Orange
HDMI: v1.4 High Speed cable with bandwidth to support 1080p, 3D, and 4K/UHD 2160P picture @ 60 fps
Length: 6 ft.
Install Hardware Included:
5/16" x 2.75" Lag Bolts (4)
Lag Bolt Washers (4)
M4 x 12mm Screws (4)
M4 x 35mm Screws (4)
M6 x 12mm Screws (4)
M6 x 35mm Screws (4)
M8 x 16mm Screws (4)
M8 x 20mm Screws (4)
M8 x 35mm Screws (4)
M4/M5 Washers (4)
M6/M8 Washers (4)
22mm (7/8") TV Spacers (4)
Most helpful customer reviews
362 of 372 people found the following review helpful.
Excellent TV mount and a trick
By jkw Austin
Outstanding design and construction! Easy to assemble. The hooks from which the TV hangs are large, making it very easy to mount TV once the main assembly is attached to the wall. I had the follow issue-where I want to center the TV was right over a stud. I mounted a 3x1 ft by 3/4"piece of maple to the the studs to either side of the center stud. I would have also put screws into the center stud if my TV was heavy but at only 37 lbs did not feel that necessary. I then screwed the TV mount to the board with 10 3/8 by 1" lag screws. Using this system, you could attached the mount anywhere left-to-right on the board, would not need to be centered
212 of 222 people found the following review helpful.
By Brenden Coviello
OMG! If you are looking for a super high quality articulating mount this is it. Look no further. I love this mount and will only use Echogear mounts going forward. I'll even recommend to all my friends and family. It's a rock solid mount and the quality is superior. Check out my mount job.
198 of 211 people found the following review helpful.
ECHOGEAR Recommend Buy !
By Stephen J. Hall
I assembled and installed the ECHOGEAR Full Motion Articulating TV wall mount to a brick wall. Then I installed an old Sony 46" KDL-46V2500 LCD TV in 51" enclose which is heavier than 70" LED TV. It was a chore for two people to mount the Sony TV just because of the weight. No problem for one person to assembling and install ECHOGEAR. I plan to replace TV with a 70" LED TV this November. At that time I will purchase my second ECHOGEAR full motion bracket to install in my study. I see no evidence of instability with the bracket what so ever, it is solid engineering. The wife loved the fact that we can pivot the screen so she can see TV from the kitchen which is at right angle to the wall that TV is mounted on. It is just about impossible to expect a masonry bit to be dead center but not to worry with ECHOGEAR, the level adjustment was simple to null out the leveling error so LCD was perfectly level for viewing. It was easy to install the two TV rails on the back of the TV, I used two of the longer screws included in the ECHOGEAR kit. I am delighted with the functionality and quality of ECHOGEAR so much so as I stated early I am purchasing a second one. That one will be mounted on a normal sheet rock wall in my Study and I am looking forward to easier installation. Even if I would keep the TV close to the wall being able to extend it away from the wall facilitates plugging in all the cables. I think the fact that I am buying a second one for the Study says all you need to know. I am satisfied ECHOGEAR customer. Update, installed my second ECHOGEAR in the Study this past week to the studs in the sheet rock wall.