Taotronics Bike Phone Mount Bicycle Holder, Universal Cradle Clamp for iOS Android Smartphone GPS other Devices, with One-button Released, 360 Degrees Rotatable, Rubber Strap
Availability: Usually ships in 24 hours
Fulfilled by Amazon and Sold by Sunvalleytek
|BV Bicycle Strap-On Saddle/Seat Bag, Medium, Black
|UShake Bike Lock Cable, 4-Feet Bike Cable Basic Self Coiling Resettable Combination Cable Bike Locks with Complimentary Mounting Bracket, 4 Feet x 1/2 Inch
|WOTOW 16 in 1 Multi-Function Bike Bicycle Cycling Mechanic Repair Tool Kit With 3 pcs Tire Pry Bars Rods
No matter where you are cycling in the city or adventuring in the wild, the TaoTronics TT-SH013 Bicycle Phone Mount is your first choice for holding, securing and protecting your smartphone and devices when cycling. It is the perfect cycling companion you've ever had. While primarily designed for holding smartphone, the TaoTronics bike phone holder can accommodate any device with width between 1.97 and 3.94 inches. This includes DVRs, digital cameras, small tablets etc. It frees your hand so that you get to have the most fun without getting lost or bored. The extendable cradle arms hold your device in place while the rubber grip double secures it so that your device stays nicely tucked in. The all-around protection prevents your phone from slipping out on the most rugged roads or turbulent trails. The clamp with an adjusting knob not only fixes the mount on your handlebar but also presents the possibility for wider application. It is easily installed on your bicycle with a simple twist - no extra tools are needed. Removing your device is made easy with a simple one-button release design.
Most helpful customer reviews
42 of 43 people found the following review helpful.
An inexpensive, well-constructed game-changer
By David Risher
If until now you've been pulling your iPhone out of your pocket to check directions and then putting it back in, this changes the game. Minutes after I installed it, I set off on a 35-mile ride north of San Francisco and was blown away by how much more helpful turn-by-turn cycling directions are when you can actually see the map. Plus the mount couldn't be simpler to install, couldn't do a better job at what it claims to do, and would still be cheap at twice the price. Don't over-think this one: if you're interested enough to be reading this review, you should probably just buy this product.
20 of 20 people found the following review helpful.
Sturdy Cellphone Mount—Installation Instruction
This is a well designed and solidly built product, but, during installation, I managed to break it. (Details follow; read on...) Sunvalleytek, the seller, was so good as to overlook my bungling and send me a replacement bicycle mount. That, in itself, is worth five stars!
To avoid my mistake, be aware: there is a long, threaded shaft running through the jaws of the handlebar clamp. (Obviously, it has something to do with the tightness of the jaws.) On one end of this shaft is a cap nut; on the other end, is a washer and a quick-disconnect lever. Note that both the cap nut and the lever are cemented with loctite to the threaded shaft. Do NOT try to loosen the cap nut or quick-disconnect lever to adjust the jaw tension. (That's what I did. Then, when I realized that both the cap nut and the lever are supposed to remain sealed, I tried to secure them with crazy glue. The glue ran and froze the quick-disconnect lever. So I ruined a perfectly good cellphone mount.)
Note that the threaded shaft passes through a slot in the upper jaw, but it screws through a metal pivot-pin in the lower jaw. To adjust the jaw clamping tension, position the unit next to the bike handlebars with the quick-disconnect lever up and the cap nut facing down. Keeping the quick-disconnect lever extended, grasp the cap nut with thumb-and-forefinger and screw the threaded shaft until the jaw-opening just clears the handlebar. Position the unit on the handlebars and turn the cap nut and shaft (by hand) until the jaws are snug. Finally, press down and close the lever.
I don't have a smart phone, so I use this holder for my GPS (in pedestrian mode). Good luck!
32 of 34 people found the following review helpful.
Well engineered, secure, and easy to install.
This is a very versatile mount for holding your device while you ride your bike. The unit secures to your handlebar and then the cradle holds your phone securely with a spring loaded side clamp and rubber band. I found no Cons with this product since it is priced reasonably and well designed. I use it with a iPhone 6S plus and it easily clamps the device.