- ăWireless Backup camera & waterproof transmitterăCamera connected to monitor via 2.4G wireless signal, it takes the place of complicated wiring, easy installation and the IP69k Waterproof level allows install it anywhere near the reversing light, the wireless transmitter working range up to 150ft in open area and 30-55ft on vehicle, we recommend to install it on vehicle under 30ft for get no-interruption signals.
- ăIP69 Waterproof HD Reverse CameraăHide bracket behind the license plate, no need to drill hole; While based on Digital High definition Image processor, CMOS Sensor will present excellent images for you. IP69 Waterproof with 8 individual LEDs, provide superior clear images even in rainy days or during night. The 170Â°wide angel will greatly reduce reversing blind spot, ensure parking safety.
- ăWireless backup camera with monitorăThe 5'' LCD display also has 2 power Supply, powered by cigarette lighter or powered by ACC (directly connecting to a 12v source fuse box). And car backup camera monitor has 2 way installation, mount it on windshield or dashboard. After long time using, the monitor holder may become dirty and non-sticky, the suction pad can be washed and reuse again. Default pictures is Mirror, please cut the white wire to get Normal, then reboot the monitor.
- ăSuitable for 12-24V vehiclesăThe wireless backup camera system voltage range from 12-24V DC power to accommodate a wide variety of vehicles, such as Cars, Pickups, Suvs, RVs, Vans; even connect your vehicle to any trailer in seconds -- Boat, Camper, Horse, ATV, Livestock and etc. Full 12m Warranty, email replies within 24H, and 100% Satisfaction Guarantee.
- ăEasy to installă2 Power Supply Of backup camera, if powered by reverse light, the monitor will automatically turn on when Reverse gear is engaged (Red connect to Reverse light, Black connect to Metal); Or if powered by continuous power (Red connect to continuous power, Black connect to Metal),then it can act as a full time rear-view monitor; Parking guidelines is optional, default without until cut off the green wire, then press the red button of car charger to reboot the monitor.
DescriptionDigital Wireless Backup Camera Kit for Trucks /Pickups /Vans /Trailers /Camper etc EASY INSTALLATION
1.Install the Rearview Camera to your existing license plate mount & connect to the wireless transmitter.
2.Install the wireless transmitter, Connect Red wire of the transmitter to reverse light(+) and black wire to any metal ground screw.
3.Install the car backup camera monitor(receiver), plug the car charger and install the rear view monitor on dashboard or windshiled as you like. Kind Reminder:
1.Short press the DOWN Button to turn on/off the monitor.
2.Long Press the Menu Button to navigate through menus
3.Short press the Menu Button to confirm the options. HD License Plate Backup Camera
-Image sensors: IR Color CMOS
-Lens Angle: 170°
-Resolution: 480 TV lines
-TV System: PAL/NTSC
-Waterproof grade: IP69
-Effective Pixels: 648 x 488pixels
-Video Output: 1.0vp-p, 750hm
-Operating Temperature: --4â--158â
Notice: Cut the green wire get parking guideline, cut white wire get mirror or Normal image.
Digital Wireless Transmitter
-Transmitter range: 200M(660ft) in Open area
-RF Bit Rate: 6Mbps Max
-Transmitter Power: 18dBm
-Operation frequency: 2400-2480MHz*
-Power supply: Transmitter DC12-24V
-Power Output: Transmitter DC12V output for camera
Notice: The transmitter should not be covered by metal. Wireless Rear View Monitor(Receiver)
-Screen Size: 5 inch(16:9)
-Resolution: 480(h) x RGBx 272(v)
-Visible Area: 86*54mm
-Power: DC 12-24V
-Video input: Wireless
-Work Temperature: 14â-104â Notice: If it's no signal Input, it will enter Power Saving Mode, the screen will turn black.