- âœ” EASY SETUP: Sonic Recognition Technology featuring One Key WiFi Configuration makes setup so quick and easy, .Just plug in the power cable, download the ismartviewplus App and set it up via your iPhone or Andriod smartphone, remote access to the wireless security camera on iPhone/ iPad/ Android phone/ tablet/ MAC/PC, keep an eye on your loves and belongs anywhere anytime.
- âœ” MOTION DETECTION: Motion Detection with email or push alert notifications based on motion sensing technology. Motion detection sensibility can be adjusted by yourself, When the camera detected abnormity or alarm is triggered, instant alarm pictures will be sent via email/FTP.
- âœ” EASY INSTALLATION: You can put the Mini Security Camera on desk and adjust the viewing angle to your needs or take the plastic part off and put it on the wall with the included screws. Install the home security camera in baby room, office, kitchen, living room. You can monitor every corner of your house.
- âœ”RENOTE ACCESS AND HD 720P VIDEO: Remote access to the camera on Smartphone, Tablet, Mac or Windows PC. Quick WiFi setup via iPhone or Andriod smartphone using ismartviewplus APP. One Key WI-FI configuration via sound beep, quick and easy installation, With Night Vision. Crystal clear HD 720p video 80Âº wide angle lens, 4x digital zoom HD displays with H.264 compression, 1/4" CMOS Sensor. Motion detection Email Alert and Andriod Phone push , Auto Snapshots, support ONVIF
- âœ” NOTE: 1)Please make sure to connect your phone to Wi-Fi (Not support 5G wifi) when you are doing the One Key WiFi Configuration. 2) Please do the configuration in 5 minutes after the WiFi camera gets started. If exceed 5 minutes the configuration will be failed. You need to reboot the camera by power it up again. 3) Please wait for 2 minutes after you plug in the power cord since the camera needs to initialize.
DescriptionVideo on how to connect the WIFI by OneKey Wifi Configuration:
https://www.youtube.com/watch?v=-gyUxBtTuBs One Key WI-FI Configuration
1. Run the "ismartviewplus" App. Click"More"--"One Key Wifi", Input WI-FI password and then "Configure"
2. When the phone makes "Beeps" sound, place the phone next to the camera until the camera LED blinks quickly and solid.
3. When you see the camera LED is solid Blue, please Scan QR Code on the camera via tapping"Add Camera", input password 123456
Video on how to connect the WIFI by OneKey Wifi Configuration:
New feature: One Key WI-FI Configuration by WPS/QSS Trouble Shooting
A. Cannot connect to WIFI
a. Make sure the APP version is the latest.
b. Make sure your WiFi has password, otherwise, you will configure failed
c. Make sure you have done the wifi configuration, visit youtube Video above
d. Make sure the Red LED always ON for the power cord, and the blue LED blinks or ON for the camera.
If the power cord LED does not ON always please contact after-sales team for replacement.
e. Reboot the camera via plug out the cord for 1 minute and re-plug in the cord.
f. If above steps does not work, please reset the camera via press and hold the reset button for 10 seconds, and the blue LED will be OFF for 1 second and then flash slowly.
B. Motion Detection Email Setting
Advanced Settings>Alarm Setting>Motion Detect Armed ON, Save Picture on SD/FTP, Send Email When Alarm
If you need to set Email: Advanced Settings>Mail Setting>Fill in all Blanks including Authentication ON