VideoSecu ML531BE TV Wall Mount for most 22"-55" LED LCD Plasma Flat Screen Monitor up to 88 lb VESA 400x400 with Full Motion Swivel Articulating 20 in Extension Arm, HDMI Cable & Bubble Level WP5
Availability: Usually ships in 24 hours
Fulfilled by Amazon and Sold by Warehouseseller
|Samsung Electronics UN32M5300AFXZA Flat 32" LED 1920 x 1080p 5 Series SmartTV 2017
Too low to display
|Samsung Electronics UN40MU6300 40-Inch 4K Ultra HD Smart LED TV (2017 Model)
Too low to display
|TCL 55S405 55-Inch 4K Ultra HD Roku Smart LED TV (2017 Model)
The VideoSecu articulating mount is a mounting solution for 22"- 42", some models up to 55 inch (Please check VESA and Weight). The TV mount fit VESA 200x200mm/200x100/100x100 (8"x8"/8"x4"/4"x4"). This wall mount comes with 4 removable mount adapters. It can extend the VESA to 400x400 400x300 400x200 300x300 300x200 (16"x16"/16"x12"/16"x8"/12"x12"/12"x8"). Please check your TV VESA; these are square or rectangular patterns between 4 and 16 inches per side on the rear of your display. Heavy gauge steel construction provides safety loading up to 88lbs display. The high-tech look mount offers 15 degrees forward and 5 degrees backward tilt, 180 degrees of swivel and extension up to 20 inch for viewing angle and TV placement adjustment. The removable VESA plate can be taken off for easy installation.
Will the mount fit my TV?
Firstly, please check the weight of your display, it should be less than 88 lbs. Secondly, If your Monitor or TV has 4 mounting holes on the back of the screen that are 400x400 400x300 400x200 300x300 300x200 200x200mm/200x100/100x100 (16"x16"/16"x12"/16"x8"/12"x12"/12"x8"/8"x8"/8"x4"/4"x4") apart from each other vertically and horizontally this bracket will fit. In addition, please check the area inside the 4 mounting holes to make sure there are not any plugs. Otherwise, the plate may block the plugs.
Notice: This mount fits most 22-49" TVs (VESA 400x400/400x300/400x200/300x300/300x200/200x200/200x100/100x100mm(16x16"/16x12"/16x8"/12x12"/12x8"/8x8"/8x4"/4x4")), some up to 50 55 inch TVs manufactured in recent 3 years
Most helpful customer reviews
361 of 372 people found the following review helpful.
Drill 3/16" Pilot Hole, Not 7/32" - Otherwise Easy to Install and STRONG!
By Derek Tombrello
I used to install TVs for people professionally, so I have used many different mounting systems. I was looking for something cheap, but reliable to hang a 50" LG 50LA6200 LCD TV. I looked at a lot of options both on Amazon as well as elsewhere before settling in this one. I am happy that I did!
For starters, this comes with EVERYTHING that you could possible need to hang your TV, with the exception of a #2 phillips head screwdriver and a drill. Included are a complete assortment of screws, bolts and washers (all neatly organized and labeled in individual packets), a double-sided spanner wrench, a very nice magnetic level, and even a 10' HDMI cable. The instructions say to use the "optional" expansion kit for larger TVs. Usually, this is code for "kit not included." I was pleasantly surprised to find that that was not the case here. For once, the "optional" kit was actually included!
Installation was a breeze for me, even without instructions since I already know how this works, but I found the instructions relatively easy to follow for those who need them. All of the various configurations for the expansion arms can get confusing, but just try each one until you find the right setup for your TV.
** PLEASE NOTE **
There is one change to the instructions that I highly suggest, however. The instructions say to drill a 7/32" pilot hole into the stud for each mounting bolt. Then screw the bolt in with a phillips head screwdriver. When I first mounted this (I wound up moving it shortly thereafter), I followed the suggestions for the pilot hole. Sure enough the screw did thread in easily... a little TOO easily. The second hole from the top actually stripped out and I was not putting much force behind the screwdriver at all! When I moved this to the other side of the room, I decided to go with a smaller pilot bit. I used a 3/16" bit instead. Granted, you are not going to thread the bolt in with a screwdriver - you will need a 10mm socket - but doing it this way, those bolts are not going anywhere! You could probably get away with a 13/64" bit, but to really protect your expensive TV, I would want all of the bite I could get!
I also found that the inside diameter of one of the washers was a smidge too small for the bolt to go through. I just enlarged it with a round needle file, but since they don't include any spares, if you don't have a file or another washer laying around, you'll need to get one. Just thought I'd throw that out there in the interest of full disclosure.
Once this was installed, I was impressed with not only the sturdiness, but also with the complete range of motion. This is fully articulated. You can put your TV pretty much anywhere you want to. The only thing it can't do is move your TV up or down, although you can tilt it to a certain degree.
1044 of 1090 people found the following review helpful.
Great quality mount
8/28/2017 UPDATE: The review and the pictures below are accurate for the TV mount I purchased on 01/26/2015. From the comments I am getting for the past 6 months, it seems that the seller might have changed the product since, and my review and pictures might not match the current product. That is not under my control, seller should have created a new listing for the new product but chose instead to use the same listing because of the 19000+ reviews posted. So please don't blame it on me, I'm just a customer that wrote a review to the product I received back in 2015.
Original review written on 03/02/2015:
Bought it to mount 3 LED TVs (2x65", 1x50") in an office, chose this model mostly because of the lockable feature. I didn't use the included lag bolts because of the poor quality complaints in previous reviews. I didn't want to take the chance to strip the included bolts so I bought 5/16-9 2-1/2 lag bolts from Lowes (item 63396) and a box of 1/4" Toggler bolts (Lowes item 118084). On one of the 65" TVs and the 50" TV, the 2x4 studs were spaced perfectly and I was able to mount them using 4 lag bolts each. On the other 65" TV, the stud was about 2" off center so I put 2 lag bolts in the stud and 4 toggler bolts in the left and right most holes. I put my entire weight (200 lbs) on each mount half way extended and they held up just fine. Here are the pros and cons:
1. Good quality mount
2. Ability to adjust the horizontal leveling (plus/minus 6 deg)
3. Lockable mount with 5 mm holes. Most pad locks you can find in stores have 6 mm shackle diameter, but I found the Master Lock 131Q has 5 mm locks and it fit just right.
4. 10 ft HDMI cable included
5. Long arms give you the option of moving the TV in almost any position.
1. There is nothing to stop the TV from sliding from one way to the other on the two horizontal bars. That would screw up the horizontal alignment every time the TV is moved. Not sure how they didn't think about this. I used some black duct tape to prevent that. I could have drilled holes in the horizontal bars and put some screws in but duck tape was faster.
2. I wish I could have been able to use zip ties to route the cable on the wall side from the lower side to the upper side or the mount, but there are no holes to get the zip ties in.
Very happy with the purchase overall, would buy again in a heartbeat.
You can see how it looks with a 65" TV attached in the pictures below.
176 of 184 people found the following review helpful.
This TV mount is beyond my expectations. Very well built.
By Cody Coyne
So I was very skeptical of this product when I first looked at it, lots of people saying it would tear out of the wall shortly after installation and all that. Lemme tell you, they just did it wrong or like complete idiots; you do no use dry-wall mounts for a heavy TV, possibly a lighter TV, and I can not stress the word "Light" enough. No one should be using dry-wall mounts in the first place, they are not reliable... plain and simple.
Anyways, back to my experience with the product. I have it mounted above my Xbox One about 4 feet off the ground. I mounted to a stud in the wall and right after that, my roommate who weighs around 150 LBS hung off of it for about 5 seconds at the base and it didn't even budge; now that's a tough wall mount if I ever saw one! I put my 40" Samsung TV on the mount, and I can extend/swivel/angle/tilt it however I want.
The gear it comes with is pretty high quality and especially the level. For an add on to the product the level is pretty decent for it's designed purpose. The packaging is well done and the parts are all labeled well and accordingly. Make sure you use washers on the outside of the mount before you put the TV adapter on your TV, they will save you a lot of grief.
I've had this wall mount for a month so I felt pretty confident in writing a review. I'll add some pictures to let you know the range of motion as well as how the TV looks how I attached the adapter and the part where it's mounted to the wall. I can sit specifically off to the side and enjoy the TV along, I can turn it to look at my PC area so I can play while I talk to friends on Skype or other chat programs and I can turn it to look at my bed and I can enjoy Neflix or Hulu as I lay in bed, nice and cozy.
I hope you all enjoyed my review, it's been a blast and I'll be willing to answer any questions you might have.